Schulz Industrial Single Stage Cast Iron Air Compressor Pump 2 or 3 HP MLS-10MAX

Description

This listing is for a Schulz model 10 cast iron oil lubricated single stage air compressor pump. This is a long lasting industrial quality pump that pumps up to 140 max psi. This pump will work with 2 or 3 horse power motors. With a 2 HP motor your CFM will be around 8.5 displacement CFM at 810 rpm, with a 3 HP motor spinning at 950 RPM will produce about 10 displacement CFM. We recommend that you spin this pump between 700 and 1000 RPM for best results. This makes a great replacement pump for most any air compressor with a 2 - 3 HP motor with its slotted base it will adapt to a lot of tanks without any modification, if it does not fit your current pump mounting holes, new holes can easily be drilled. The head and cylinder of this compressor also can be flipped around.
YOUR COMPRESSOR, COMPRESSOR PARTS, & ACCESSORY SUPERSTORE!
Home
All Products
Contact Us
Returns
About Us
MENU
Store Pages
Home
All Products
Contact Us
Returns
About Us
Store Categories
1/2" RapidAir Maxline
3/4" RapidAir Maxline
3/8" RapidAir Garage Piping
Accessories
Air Compressor Oil
Air Compressor Pumps
Air Compressors
Air Hoses
Air Tank Manifolds
Belts
Blow Guns & Tire Inflators
Check Valves
Compressor Rebuilt Kits
Couplers & Fittings
Electric Motors
Gauges
Hose Reels
Intake Filters
Magnetic Starters
Pressure Switches
Pulleys A Section
Regulators, Filters, & Oilers
Relief Valves
Tank Moisture Drains
Throttle Cont Cables & Valves
Tire Inflators
Unloader Valves
Vibration Pads
Other
GREAT SELECTION OF PRODUCTS
/
FAST SHIPPING
/
FREE SHIPPING ON MOST ITEMS
/
PRODUCT KNOWLEDGE & SUPPORT
Store Categories
1/2" RapidAir Maxline
3/4" RapidAir Maxline
3/8" RapidAir Garage Piping
Accessories
Air Compressor Oil
Air Compressor Pumps
Air Compressors
Air Hoses
Air Tank Manifolds
Belts
Blow Guns & Tire Inflators
Check Valves
Compressor Rebuilt Kits
Couplers & Fittings
Electric Motors
Gauges
Hose Reels
Intake Filters
Magnetic Starters
Pressure Switches
Pulleys A Section
Regulators, Filters, & Oilers
Relief Valves
Tank Moisture Drains
Throttle Cont Cables & Valves
Tire Inflators
Unloader Valves
Vibration Pads
Other
Store Newsletter
Add our store to your Favorites to receive our email newsletters about new items & special promotions.
General Interest
SIGN UP
Schulz Industrial Single Stage Cast Iron Air Compressor Pump 2 or 3 HP MLS-10MAX
Product Description
Schulz Cast Iron Model: MLS 10 MAX Air Compressor Pump-
(Plus Bonus Free Intake Filter)
.95 value , Filter Made in USA
This listing is for a Schulz model 10 cast iron oil lubricated single stage air compressor pump. This is a long lasting industrial quality pump that pumps up to 140 max psi. This pump will work with 2 or 3 horse power motors. With a 2 HP motor your CFM will be around 8.5 displacement CFM at 810 rpm, with a 3 HP motor spinning at 950 RPM will produce about 10 displacement CFM. We recommend that you spin this pump between 700 and 1000 RPM for best results. This makes a great replacement pump for most any air compressor with a 2 - 3 HP motor with its slotted base it will adapt to a lot of tanks without any modification, if it does not fit your current pump mounting holes, new holes can easily be drilled. The head and cylinder of this compressor also can be flipped around to put the air outlet / discharge on either side of the pump for easy installation. If the fly wheel is a different size than the pump you currently have it is easy to calculate what size pulley you will need to put on your motor, (you take motor RPM x diameter of motor pulley and divide it by diameter of the pump pulley) that will give you the RPM you pump will be spinning. Dimensions and Specs below.
Specifications:
• 2 cylinder
• 2" pistons
• 125 PSI Recomended
• 140 PSI Max
• Oil lubricated
• Fly wheel diameter 10"
• Fly wheel uses one (A) section belt
• Air discharge port on head is 3/8" female pipe thread which measures about 9/16" in diameter
• Looking at the flywheel side the air outlet / discharge port comes out on the right hand side.
• Oil sight glass located on front of the pump for easy viewing.
• If looking at the front of the pump where sight glass is located the bolt mounting holes are 5 7/8" wide center to center, the bolt holes are slotted from front to back so the bolt holes from the front of the pump to the back can be anywhere 4 3/4" center to center to 6 1/4" center to center.
• Total width of pump 7"
• Total depth including fly wheel 11.25"
• Total height a little over 12"
• Free intake filter included as shown in the picture-
(California Residents Warning: This product contains or may contain chemicals including lead known in the state of California to cause cancer, birth defects, or other reproductive harm. We suggest washing hands after handling. California law requires this warning be given to all customers in the state of California. (California Health and Safety Code 25249.5 et seq.)
Return Policy
Return Policy We accept returns within 30 days of purchase. A 20% restocking fee applies on all items returned for a refund. If you receive a manufacture defective item and want to exchange it there is no restocking fee. No refunds will be given on items that have been opened or used and will be exchange only. Anything being returned must include all original parts sent or fees will apply. Buyer is responsible for return shipping costs to us. We will pay to ship the item replacement back to you. All returns need to have a note included with the buyers information and reason for return or exchange.
Shipping
Shipping At Compressor Source we are dedicated to our service for you! We ship all items within 24 hours of payment Monday-Friday. We are closed on weekends and holidays. Most all items ordered Tuesday-Friday by 12:00pm Central Time, will ship the same day. If for any reason there is an issue with your order we will contact you right away. If you are in need of expedited shipping, please contact us via ebay messaging system.
Contact
Contact For any questions you may have about your purchase, or any of our products feel free to message us via the eBay message system and we will respond within 24 hours Monday-Friday
Payment
Payment All Payments are made through PayPal. If you have any questions feel free to Message us via the eBay message system at any time.
Feedback
Feedback At Compressor Source we strive for great customer service and to sell the best quality parts at the lowest prices possible. We leave feedback for all purchases. If for any reason you are not satisfied with your purchase or have any issues, please contact us first via the eBay message system. We would love to have the opportunity to earn your positive feedback and look forward to your future business.
Home
All Products
Contact Us
Returns
About Us
Copyright © 2017
Compressor-Source
. All rights reserved.
eBay Template Design by OCDesignsOnline